Categories
Uncategorized

Inspiring short gear list for a world tour.

Cyclists David Byrne and Julie Retka have an inspiring gear list on their website “Recycling the World.”  Go see it.  I’m impressed that he’s traveling so simply and using only two and a half panniers. Nice example of lightweight touring.

Note that David is riding a Cruzbike Sofrider (version V2).  For pannier racks, he’s using Axiom front racks custom-attached to his bike. Since the current version of the Sofrider doesn’t readily take underseat racks, that seems to be the best solution.

Julie rides a Cruzbike Quest. Photos (buried in the blog) show it fitted with racks and bags.

All in all, an inspiring bit of “keeping it simple” and “Doing It Yourself” and “just getting out and seeing the world.”

Best,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2012 Robert Matson

Categories
Uncategorized

New York’s nicest day ride, now a lot nicer.

The more you bike the more you get twisted.  In my case, I can’t bare the sight a beautiful weekend day unless I can ride.  Take last Saturday for example.  With partial sun and mid-40’s temps, it was the perfect mid-winter day for a long ride.  I was scheduled to go to a party/meeting of the Appalachian Mountain Club’s backpack committee in Ossining, NY.  I needed no better excuse and decided to bike there.

This was my route, for the most part, going 45 miles from Brooklyn to the Ossining, NY Metro North station.  If you try and follow it, know that Google mis-identified some one-way roads as going the wrong-way.  It took me 4 hours, including stops for “comfort breaks.”  I rode an HP Velotechnik Grasshopper fx, with Ortlieb recumbent backpack/rack-top bag, and one bunch of collard greens strapped onto the rack-top bag with a bungee net (get it from Rivendell Bicycle Works).

Three years ago, I first rode this route.  At that time, the South County Trailway (Westchester) was incomplete and there were numerous miserable detours connecting sections of the rail trail, if you could find them.  (“Why should I mind riding a Rans Screamer recumbent tandem on rocky and muddy single track?”  “I think the rail trail must continue up there, somewhere.”  “Who says I can’t shoulder a recumbent tandem like a cyclocross bike and carry it up a hill?”)  That trip, estimated at six hours, ended up taking 12 or more.  Admittedly, the long, hard day may have been due to the ozone alert, 110-degree temps, numerous breaks, as well as getting lost, still, the route was eminently blamable.

These days, hallelujah, it’s a straight shot, from New York’s Van Cortlandt Park, where you pick up the Old Putnam Rail Trail, on up.  Only a short section through Elmsford takes you on city streets.  As a result, this is now one of the best routes out of the city.

Go out and ride it.

Best,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2012 Robert Matson

Categories
Uncategorized

Ortlieb recumbent backpack: got one, love it. But check your rack size.

Not me, not my pony tail, but it is a nice photo of
Ortlieb’s recumbent backpack and panniers in action.
(External link. Photo thanks to therandonneeshop.com).

Review: Ortlieb recumbent backpack. Got one, love it, but verify size of rear rack.

I’m a New York City Ortlieb dealer, just so you know.  Call me biased, but if I thought there was a better bag, I would have bought whatever was better. The Ortlieb recumbent backpack is the bag I use as my racktop bag.

On a typical day-long ride, it carries my water bladder, the day’s clothes, food, maps, rain gear, “ten essentials”…. Coolest thing is that it sits in the slip stream and I’m convinced it gives me a slight speed increase in the same manner as the very cool (but now discontinued) Terracycle tail sock.

The Ortlieb bag has nifty backpack straps that attach (click, click, click, click, easy) to turn it into a surprisingly decent daypack. Water bladder drinking tube goes through a standard-sized sealed hole so pack contents stay dry in the rain. The reflective patches are 3M or similar quality — VERY bright and positioned for good reflection both to back and sides. All in all, it’s a great bag. I wish it were cheaper, but when you see it, you’ll understand — very high quality and built to last.

Rack size can be an issue. I use it on a 4 1/2″ wide, 18″ long HP Velotechnik rack (as on the Grasshopper, Street Machine or Scorpion). It’s designed for racks of this dimension, pretty standard for Euro bents. It wouldn’t work as well on a narrower rack like a Tubus or a shorter rack.

The Ortlieb “recumbent backpack” on a Grasshopper fx,
on the George Washington Bridge, during a two-day trip
through Harriman State Park. Nice bag.

Hope that helps.

Best,
Robert

————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2012 Robert Matson

Categories
Uncategorized

Training for touring: workout schedules

The tour operator Experience Plus publishes a series of workout schedules that will help cyclists prepare for long day rides and multi-day touring. Start training now so you’re ready when the weather warms up!

http://www.experienceplus.com/blog/?tag=bicycle-training-packet

Best,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2012 Robert Matson

Categories
Uncategorized

How much capacity required when touring light?

“Would you like four panniers or two?”

A customer — who rides a sky blue Volae Century ES — named Wylie (see her excellent blog Couch Surfing Cook) sent me a link to a nice site about long distance touring: www.skalatitude.com.  This blog, written by a female cyclist touring solo, contains tips and ideas that apply to anyone, male and female alike, who wishes to bicycle far.

She specifically directed me to an entry about lightweight cycle touring with only two panniers, a minimal amount of carrying capacity.  It challenges the notion that long haul cycle tourists need the capacity provided by four panniers.  This is a welcome and interesting voice in the discussion around ultra-light packing as we continually seek knowledge on how to travel “better.”  (I define “better” as “safer, more fun and more expeditious,” just so you know where I stand.)  Is it better to pack minimally and light?  Is it better to pack for comfort and security?  How do we pack and prepare for the most common and/or serious pitfalls?  Do we carry a water filter or iodine?  What goes into our first aid kit?  Synthetic or down jacket?  Tent or tarp?  Shoes or sandals?  Each of us determines our own comfort zone in the continuum.

Before I get into a discussion about bag capacity, I’ll make clear my position on the subject of packing for preparedness: I pack for safety above all else because if I don’t arrive safely, I don’t arrive.  Secondly I pack to have fun, because that’s why I do trips.  Thirdly, I pack only the essentials that I’ll need to get where I’m going.  I carry tools to repair every element of my bike.  I carry water purification and a stove when I’m in remote areas.  I always have backup lights and batteries.  I carry a first aid kit that is larger than my Western Mountaineering sleeping bag and I know how to use it thanks to Wilderness First Responder training.  And, fortunately, at this time, I’m healthy and strong enough that while I do count pounds, I rarely count ounces; bike weight is of minor concern.

Going forward now, I’d like to delve into a specific aspect of the article, concerning the writer’s two-pannier baggage carrying system, and translate it for short wheelbase recumbent bikes.  Sometimes the wisdom about bike touring needs to be translated over to the recumbent frame.

How much capacity do we need and where do we mount it?

Optimal bike handling (a.k.a., safe bike handling) is retained by loading the weight near the center or gravity and low to the ground.  So, on a standard frame (“SF”) bike, generally people load a bike in this order: 1. frame packs (water bottle cages, seat bottom, center triangle); 2. top of the rear rack; 3. handlebars; 4. large panniers on the rear rack; and 5. small size panniers on the front fork, if necessary.  All the while, one seeks to keep the weight low (food, water, tools go at bottom of rear and front bags).  Unlike bents, SF bikes lack the option of mounting low rider packs in the center of the bike.

On a short wheelbase (“SWB”) recumbent, optimal handling is retained by loading as follows: 1. low on the back of the seat (at the center of gravity); 2. frame packs; 3. small panniers under the seat; 4. large panniers on the rear rack; 5. rack top; and 6. high on the back of the seat.  As on a standard frame bike, a bent handles best if you place heavy items as low as possible.  Unlike SF bikes, SWB bents rarely accept panniers on the front fork.  As for traditional handlebar bags, they are generally unmountable and all the bent-specific versions I’ve seen are minuscule.  (If you know of an exception to this, send me the link [rmatson AT theinnovationworks DOT com].)  I suggest loading bents in this sequence because one’s upper body weight is not available (as it is on a SF) to comfortably counter-balance a lopsided load (e.g., top heavy or side-weighted).  Also, an improperly loaded bent may tip at low speeds or in slow sharp turns, and no longer track easily when guided by hand, as when walking through a train station or up a steep hill.

In terms of carrying capacity, a challenge for SWB riders is that large size “rear” panniers — usually the first panniers we’d load on a standard frame bike — will scrape the ground on steeply angled turns when mounted under the seat, in a bent’s first loading zone.  So, the first bags we load are small capacity panniers under the seat.  What I find is that those are quickly filled and, even for just a weekend tour, I soon need another bag on the rear rack, whether it’s a rack-top bag or a rear pannier (or two).  As a result, even on short trips, it is not unusual for me to use a four- or five-bag setup, but with half-full bags!  My objective is to properly distribute the weight so the bent handles well.  Optimal handling translates directly into safer riding which, since safety is my first priority during a trip, is paramount to any other consideration, including whether a half-full bag adds wind resistance or an unnecessary pound of weight.  What is interesting is that a good bent, properly loaded, will handle almost identically to how it handles without any load and it is precisely this quality that makes a (good) bent a welcome traveling companion.

Here’s a photo of my bag setup for a two-day bike camping trip in rainy weather but moderate temperatures (50-70 F day, 40-50 F at night).  It shows two small underseat Ortlieb bags plus a rear rack bag with bungee net to hold rain gear.  On the frame I’ve mounted a bike lock (since half the trip was in urban areas), odometer, map and pepper spray.  I carry a water bladder, the day’s food and extra warm layers in the rear rack-top bag which is an Ortlieb recumbent backpack.


HP Velotechnik Grasshopper fx loaded for an apx. 160-mile weekend trip, from Brooklyn, NY, to Harriman State Park and around about and back.

Here’s a photo of your humble servant looking “high-vizible” and slightly unshorn.

New York City Recumbent Supply owner Robert Matson.

As for analyzing what to pack and how to lighten the load, I will hold off for now but will continue to post articles on that subject as I find or write them.

Links

Solo Female Cycling Around the World
http://www.skalatitude.com/

[The same] Solo Female cycling with “only two panniers.”  Includes her gear list.  I like the way she picks up and adapts gear that she finds along the road.
http://www.skalatitude.com/2012/01/rollin-with-my-hommieshow-to-bicycle.html

Recycling the World
David publishes his gear list from two round-world trips. Both gear lists are streamlined and small. Him and his wife Julie have some nice photos too.
http://recyclingtheworld.us/gear.php

Best,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2012 Robert Matson

Categories
Uncategorized

Cycle Touring – nice info. site

These two cyclists put together a very nice site about their tour around the world.  Recommended for others considering long distance tours.

http://www.grandcycletour.com/index.html

Best,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2011 Robert Matson

Categories
Uncategorized

Camping Gear: DIY fire starter / Ultralight Packlist / Down Jackets

Here are a few neat little articles of interest to cyclists doing multi-day rides and backpackers.  These were gleaned from the recent Gossamer Gear newsletter (www.gossamergear.com)

Ultralight Packlist w/ Descriptions
by Mike Clelland
This was written for backpackers, but useful for cyclists. Simply ignore the stuff aimed at hikers and translate the rest over to the bike.
http://www.backpackinglight.com/cgi-bin/backpackinglight/mike_clelland_weekly_tip.html

Cheap, good fire starter
by Jermm
http://jjmatheshikes.blogspot.com/2011/11/i-like-fire-and-im-always-interested-in.html#more

Ultralight shopping– Down Jackets
from Guthook Hikes
http://guthook.blogspot.com/2011/12/ultralight-shopping-down-jackets.html

Best,

Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2011 Robert Matson

Categories
Uncategorized

Rain gear for touring on a bent – Q & A

On Thu, November 10, 2011 8:57 am, Wylie G___ wrote:
> Do you use a large poncho that covers you and much of the bike to ride in
> the rain so that the bike doesn’t get as wet?
> A guy I just met who biked to NY from Toronto used one he got in Niagara
> Falls to ride in the rain but he was on a regular bike.
> Just curious what your strategy is to keep the seat dry and keep
> components from getting wet if possible.
> Best,
> Wylie
> READ @ http://www.couchsurfingcook.com
> LIKE @ http://www.facebook.com/couchsurfingcook
> FOLLOW on Twitter @ couchsurfngcook

Hi Wylie,

Generally, rain won’t hurt the bike, though fine grit and salt spray can (e.g., volcanic dust/mud and water from the sea or salted roads).  On a bent, a poncho blows up over one’s face.  In cold rain or cold wind, I’ll wear a rain coat and rain pants whether it’s a standard frame bike or bent.  If it’s a cool rain, I’ll wear wool or fleece to stay “warm wet.”  In a warm rain I’ll just wear my standard riding clothes since if it’s too warm, I’ll simply get soaked with sweat in the waterproof rain gear.  For me, I can get wet from sweat regardless of how good the rain barrier is — Gortex, eVent, etc.

Equally important are hand and foot protection — I use rain shell mittens and water proof socks.
http://www.rei.com/category/40005934
http://www.rei.com/category/4501322

Or visit EMS or Tents and Trails in the city.

For me, the feet are the biggest challenge.  Some bent riders prefer cleated sandals instead of bike shoes to allow diverse foot coverings – waterproof socks, multiple thick socks, barefeet, etc.

All this said, nothing teaches like time spent on the road.

Hope that helps.

Best,

Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2011 Robert Matson

Categories
Uncategorized

Multi-day ride: New York City to Martha’s Vinyard

Recumbent rider Shelly Mossey leads a multi-day trip from New York City to Martha’s Vinyard. He piggy-backs it onto the “Ride to Montauk,” which is a nice idea because the Ride to Montauk folks will carry your panniers to Montauk.  More than anything, it sounds like a nice ride for bent riders who prefer flat terrain.

Vinyard Ride
http://www.urbanmobilityproject.com/vineyard/

Ride to Montauk 2012
http://www.ridetomontauk.com/Ride_to_Montauk_2012/Home_Page.html

Best,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2011 Robert Matson

Categories
Uncategorized

24-hour overnight bike camping trips from NYC

I’m in the process of gathering a list of the best 24-hour overnight bike camping trips (aka, “S24O”) in the New York Metro area. If you have a few favorite spots that you’re willing to share, send them in.

Like me, however, you probably don’t want your favorite bike-camping spots overrun by self-centered yahoos (the kind that write comments calling me a “douche” for not publishing a list of good bike camping spots near the city, or who ask me “what the point” of a blog is if I don’t share secrets, as if I owe them something).  Like most people, I go bike-camping to get away from bozos, not to encourage them to join me.

Here’s the deal I’m offering.  If you have a favorite 24-hr. bike-camping trip from NYC, send me the route and destination. After I’ve checked it out to see if it meets my totally subjective criteria for “good,” I’ll send you one in return. That’s all there is to it. The result is we both multiply our 24-hour trip options but haven’t ruined them by inviting the whole world to our favorite spots. Ain’t that cool. If I think your destination is only so-so, I’ll send you one of my so-so destinations.

For more info. about what makes for a good 24-hr. bike trip, see this article published by Rivendell Bicycle Works. (Let me know if the link is broken; they seem to move the article from time to time.)
http://ctxtv.wmppt.servertrust.com/kb_results.asp?ID=36

For those who think I owe them routes, without offering me anything good as a trade, here is your route:
ride north on Bike Route 9 (9W, etc.) till you can’t go any further.  Sleep in a ditch next to the road.  Ride back home.  Touring is easy.  Just go out and do it.

Best,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2011 Robert Matson