Categories
Uncategorized

Panniers and bags for Cruzbike Quest 26″ and 20″

To carry luggage on a Cruzbike, I strongly recommend — and personally use — the bags made by Radical Design (“RD”) (sold in the USA by me, at New York City Recumbent Supply).  RD bags may be layered for maximum carrying capacity because they’re made of flexible Cordura(R) nylon and you don’t need a rack for many of the bags which saves weight and cost.  It’s a very smart product designed by a very smart Dutch guy.

Radical Design panniers on a Quest 26

I only sell bikes and products that I actually use and I can assure you that the RD side panniers in the medium, small and “banana” sizes will all work on a Quest 26, without requiring a rack.  The Solo Racer seat back bags work perfectly too.

Radical Design Solo Racer on the Quest 26 seat back with a Banana Racer below the seat.  35 liters of luggage capacity without the weight of a rack!

 

Banana Racer on a Quest 26. Fits great.

 

View of the rear straps of the Banana Racer on a Quest 26. Fits fine.

 

Rear straps of the Banana Racer on a Quest 26, rear view.
Rear view of the Radical Design Solo Racer on a Quest 26. Here shown without a rack, but they fit with either the standard or heavy duty racks in place.

Radical Design Side Panniers

Radical Design’s large, medium, small and banana side panniers fit your Quest 26 or 20.  Get them in the “hard shell” or “universal” width.  There are several approaches to making them work, depending on whether you have a rack installed or not, but I’m most fond of not using a rack when I mount side panniers on a Cruzbike, whether it’s a Quest, Silvio or Vendetta.

 

Q 26 with large panniers.

Here are some great photos of a Cruzbike Quest 26 with Radical Design Side Panniers, size medium.

Thanks to friend/customer, Abram Clark, in San Francisco, for showing how he mounts the RD Medium Side Panniers on a Q 26.  He and I put our heads together to figure this out, but he’s the one that made it real.  Very cool.  It also shows the brilliance of the Radical Design philosophy, that by giving riders a wide range of options, we can attach these high quality bags to a wide range of frame shapes.

This is how the bags look when mounted.  Check out where he can have the center of gravity when he loads them.  Yeah.

 

Abram invented a similar solution for his large RD side panniers on his Cruzbike Sofrider, tying them off to the rack. I saw that and hypothesized that something like this, shown here, would work. Then Abram made it happen. I’d experiment with using bungee cord instead of rope, to allow for the suspension of the rear swing arm, but I think rope is the more durable and longer term solution. Also, bungee cord is impossible to tie in the manner shown here so you’d be forced to use those terrible bungee hooks. Rope is probably best.

 

 

I like how he tied it off to the seat support.

 

Over the seat back.

 

Over the frame and under the seat, to Grandmother’s house we go.

 

Beautiful.

Size small Side Panniers on the Quest 26.  And, will my laptop fit?

A customer writes:

I have a Quest 26 (559) with standard rear rack and need a bag for it.

I plan to transport [my laptop] in a case that measure 14″ x 10″ x 1″. I would also want room for a change of clothes and a lunch and if possible a hydration bladder.

Thanks so much for your help!

R—

 

Hi R—,

Regarding: Radical Design Side Pannier size small mounted on Quest 26 (559) with standard rear rack.

Attached please find photos showing:

IMG_0163

 

How the side pannier (small) attaches. It lays on top of the seat and on top of Quest rear rack. You can remove it with one hand at the end of your ride. If you prefer, you could put the straps under the seat cushions. You could more firmly attach the rear-most strap to the rear rack with a bungee cord or velcro straps; sometimes this is desirable, but not always necessary.

 

IMG_0166

This is one way to attach the bungee cord from the rear swing arm to the rack. There are many ways to do this. If you don’t feel you need the stretching capability of a bungee cord and you know some knots, thin, lightweight climbing rope could be used instead. An old inner tube could be used also, tied to each side of the swing arm and up and over the rack. The essential requirement is to keep the bag from swinging against the tire.

 

IMG_0168

 

Photo showing my laptop in the bag.

 

IMG_0169

My laptop measures 9.5″ x 13.5″ x 1.5″. It’s a bit smaller than your case, but fits with a lot of room to spare for your clothes, lunch and water bladder.

 

In this set up, I’d put the water bladder in a side pannier and use it to counter-balance the weight of the laptop plus lunch. There are also mesh pockets on the panniers for water bottles.

The Solo Aero seat back bag from Rad. Des. is too small for your laptop.  A smaller laptop would fit.

Happy to help. I like the Radical Design and Cruzbike products a lot and enjoy seeing people using them.

All best,
Robert

 

 

How to attach the Banana Racers on the Quest 26 or 20

The rear strap is attached to the seat brace with a girth hitch. The hitch doesn’t need to be directly in the center, but for those who insist on symmetry, you can remove the seat post and place the straps around the post.  I pull the straps connecting the left and right bags tight so as to bring the bags close to the frame.

 

The front strap can go either on top of the seat or underneath the seat and on top of the frame.  The straps are buckled in the configuration for a “hard shell seat.”
The middle strap goes over the seat. Notice I added a horizontal strip of velcro to the bottom of the seat back. This helps secure the seat cushion when hanging the Solo Racer bags because their fabric sling goes between the cushion and the hard seat back.

Choosing and mounting Radical Design bags for a fully-loaded tour, without any racks

In 2012, I was preparing for a 12-day trip through the Adirondacks and Vermont.  I put together this configuration on a Quest 20.  This could work for a Sofrider and a Q 26 although I feel the rear wheel of the Q26 comes too close to the bottom of the Solo Aero.

For this solution on the Q 20, I removed the rack.  I also removed the water bottle cages; I would use a water reservoir instead. (I would do the same for a Q 26.)

I installed:
– Radical Designs (RD) Solo Aero (wide), behind the seat at the top (where the rack would have been).
– RD Solo Racer (wide), behind the seat in the location where the water bottle cages are.
– RD Banana Racer, underneath the seat.

This provided 47 liters carrying capacity, most of it within the slip stream.  That’s enough capacity for a tour if you pack moderately light and would ordinarily ride with two rear panniers.

In the above photo, a Banana Racer, Solo Aero, and Solo Racer combine to provide 47 liters of carrying capacity, most of it within the slip stream, on a Cruzbike Quest 20 (451 rims). An RD Universal Racer could have been used instead of the Solo Racer.

How does this compare to traditional panniers?  For context, Ortlieb Back Roller Classic rear panniers — the gold standard for touring panniers — provide 40 liters of capacity in the left and right panniers combined.  This Radical Design setup will be lighter than a rear bag Ortlieb setup because the RD bags are lighter and don’t require a rear rack AND because the Radical Design panniers do not use heavy waterproof materials  For waterproofing your “dry-or-die” gear, put it into plastic bags or dry bags.  (For the record I like Ortlieb panniers. I simply can’t find a good way to mount standard Ortliebs on the Quest. Ortlieb’s waterproof “racktop bag/recumbent backpack” mounts fine on a Quest with the heavy duty rack.)

For those who are staying in hotels or B and Bs, you may prefer going with the 37 liters of capacity provided by the Solo Aero and the Banana Racer, as shown here.

 

These are the bags I was using.

Solo Aero wide (12 liters capacity).
Requires removal of the Quest 20 or 26’s rack.

 

 

Universal Racer (10 liters capacity).
Solo Racer works too (size wide for bottom of seat, size narrow or wide for top of seat)
Fits Quest, Silvio, Vendetta.

 

 

Banana Racer (25 liters capacity).
Fits Quest, Silvio, Vendetta.

If you use the Quest rack to help support the panniers, read this.

If you use a rear rack to help support the panniers, there are a few concerns: (1) making sure the sharp rails of the rack do not cut the nylon webbing on the pannier bags.  (Put a section of inner tube around the sharp rails.) (2) Ensuring the weight on the rack doesn’t exceed the Quest’s standard rack rating of about 22 lbs.  You can do this with Radical Design panniers by carefully organizing your luggage so the heaviest weight falls to the front, hanging off the seat or frame. If you know you’re packing heavy, get the Quest’s optional heavy duty rack which has a payload rating of 50 lbs. (3) Keeping the bags from rubbing against the tire.

If you’re using a rack, keep them from rubbing against the rear wheel by using elastic cord (like bungee cords) or rope between the rack and the rear swing arm.  Camping rope, like para-cord will work and so will cheap plastic clothesline.  However, I’m comfortable with my knots.  Others may not be.

Another solution is to install side pannier rails on your rack, like those from Topeak (not available from NYC Recumbent Supply or Cruzbike) although I’m less fond of this solution because it adds weight and cost.

 

RD “Banana” (Side Pannier) size small on the Q 20 heavy duty rack. Sits very close to the wheel.  You can use a bungee cord or rope to keep the bag off the tire.  Or, move the bag forward on the bike, so the front straps hang from the frame, beneath the seat.

 

RD Banana (Side Pannier) size medium on the Q 20 heavy duty rack.  It can touch the wheel but it also hangs outside of the frame, which helps it stay away from the wheel.  Still, you’ll want something to keep the bag off the tire.  Move the front straps under the seat and the bag will hang entirely between the wheels on the Q26.

Have fun and stay healthy,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2013 Robert Matson

Categories
Uncategorized

HP Velotechnik Street Machine….from Japan to England

“Riding a recumbent bicycle 12,000 km solo from Japan to England.”

Found this great photo today from the writer of this blog: 14 degrees Off The Beaten Track

Author of photo: Robert Thomson from Christ Church, New Zealand, but currently from Beppu City, Japan.

I can’t help but notice it is an HP Velotechnik Street Machine, the classic — and very possibly the world’s best — touring bike.

Have fun, stay healthy and ride some more,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2013 Robert Matson

Categories
Uncategorized

Street Machine Gte on Bear Mountain

HP Velotechnik’s Street Machine Gte improves an already gorgeous view from the top of Bear Mountain.

The other weekend I had a nice 2-day ride across Harriman State Park (New York).  I had clear, dry, non-smoggy air, perfect temperatures, and, as always, a great view from the top of Bear Mountain.  I packed light and slept at the Adirondack Mountain Club’s camp.  On Sunday, it rained.  Those who enjoy riding recumbent bikes up hills would enjoy this trip.  Bear Mtn. has an average grade of about 6% with a short section of around 10%.  In the city, I get a lot of “cool bike!” comments when I ride an HP Velotechnik.  But on Bear Mountain, I got many a “good morning” and thumbs-up from the road cyclists who frequent Harriman’s roads and who, maybe, up until that point thought that recumbents “can’t do hills.”

A “cool bike” posing for a photo in front of the Bear Mountain lookout tower.

Have fun and support your state parks,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2013 Robert Matson

Categories
Uncategorized

New Jersey Department of Transportation Announces Online Bicycle Map and Resource Guide

Just now, I heard some great news from the New Jersey Bike and Walk Coalition:

On May 9, the Bicycle and Pedestrian Office of the NJ Dept. of Transportation announced an online New Jersey Bicycle Map and Resource Guide, a “comprehensive tool for those traveling by bicycle for recreation or transportation in New Jersey.” The map includes 18 (count them) state bicycle tour guides (routes), elevation, on-road bicycle facilities, a gauge showing suitability for biking, and cultural, historic, recreational and other points of interest along the way.

The guide divides New Jersey into two regions. (Click the links to download the associated PDFs, but beware, some of them are big):
a Northern map and Resource Guide highlighting the Newark area
a Southern map  and Resource Guide highlighting the Camden area

One highlight is the state atlas.  With this, you can zoom in on sections of the state where you want to ride.

Lastly, the 18 State bicycle tour guides have all been digitized.  You can download them to your smartphone, see where you are on the route, and track your progress.

These new resources reinforce the New Jersey Department of Transportation’s support for bicycling and the Complete Streets philosophy, and its goal to promote sustainable, walkable and bikeable communities.

Help keep NJ great.  Support the advocacy work of the New Jersey Bike and Walk Coalition by becoming a member. (click there).  Annual memberships range from $35 to $250.

Have fun and stay healthy,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2013 Robert Matson

Categories
Uncategorized

Using Amtrak to start a tour in the Northeast (bikes onboard)

Matthew Hopkins’ Street Machine Gte ready for re-assembly during his 30,000 mile Pan American tour.
Photo: M. Hopkins

If you’re like 7,500,000 other New Yorkers, you don’t own a car.  Good for you.  However, it also means that when you want to start a bike tour in the region, it is a challenge to get to the start.  You can begin riding from The City, but that requires 85 or so of urban miles before you’re singing country roads.  If your aim is to ride something like Adventure Cycling’s “Adirondack Park Loop,” it’ll be a few days of riding before you’re even on their map, in Niskayuna, near Albany.

Enter Amtrak.

Amtrak train service may not always run on time, but it will take you and your bike to the Adirondacks, or the Green Mountains, or Montreal… and that’s a pretty darn good start for a trip in the northeast. Unfortunately, it’s not as easy as simply wheeling your bike onboard. This is doubly-true if your wheels-of-choice are recumbent. Your bike has to fit within Amtrak’s baggage policy.

Amtrak’s baggage policy as it concerns bicycles and bicycle trailers:

These are the rules as of April 2, 2013.  The source for this information is Amtrak’s publication entitled “Baggage Policy” and their website.  To verify anything you read here — and you should, in case the information changes between the time I wrote this and the time you travel — contact Amtrak at 1-800-USA-RAIL (800-872-7245) or check Amtrak’s “Bring Your Bicycle Onboard” page. There are ongoing changes in Amtrak policy regarding bikes onboard, so be sure to check their website.

(As an alternative to Amtrak, there are regional bus lines that offer service to further flung towns. However, the bent-riding Bo or Belle may still find butt-busting barriers to get his/her bike on board that bus starting with “got your bike in a bag?” That said, I’ve recently heard from friends who put their bike in the bus’ luggage hold without any trouble whatsoever. Who knows. Best: just put it in a bag or box.)

Bicycles carried onboard: 50 lbs limit.  Standard bicycle sizes apply.
Bicycles checked as baggage: 50 lbs. limit and 70″x41″x8.5″
Includes bicycles, bike trailers and folding bikes.

Requirements:
– Bicycles/bicycle trailers may be checked in a bicycle container for $10.00, in lieu of a piece of baggage. Bicycle boxes are sold at most staffed locations for $15.00 per box. Customers may supply their own bicycle container.
– Folding bicycles under the dimensions of 34″ x 15″ x 48″/860 x 380 x 1120 mm will be allowed onboard all trains in lieu of a piece of baggage. They must be considered a true folding bicycle.
– Full-size bicycles may be carried on certain trains with designated walk-on bicycle service. Bicycles must be stowed in the designated space within the body of the car. Reservations may be made online or by calling 1-800-USA-RAIL (800-872-7245).
– Passengers utilizing the walk-on bicycle service, where bikes are carried on select trains by the passenger and stored in designated areas, must be able to fully handle their bicycle, and be able to lift their bicycle to shoulder height. Passengers are responsible for stowage and security of bicycles.
– Recumbent, tandem and special bicycles over the standard bicycle dimensions and will not fit in a standard bicycle box are prohibited.

Folding Bikes Brought Aboard as Carry-On Baggage
Folding bicycles may be brought aboard certain passenger cars as carry-on baggage. Only true folding bicycles (bicycles specifically designed to fold up into a compact assembly) are acceptable. Generally, these bikes have frame latches allowing the frame to be collapsed, and small wheels. Regular bikes of any size, with or without wheels, are not considered folding bikes, and may not be stored as folding bikes aboard trains.

You must fold up your folding bicycle before boarding the train. You may store the bike only in luggage storage areas at the end of the car (or, in Superliners, on the lower level). You may not store bikes in overhead racks.
Grasshopper fx folding recumbent bike almost ready to go on Amtrak
If you ride an HP Velotechnik Grasshopper fx, here are your folded dimensions:
(length x width x height):

38″ x 20″ x 28″ (96 cm x 50 cm x 70 cm) with under seat steering
38″ x 24″ x 28″ (96 cm x 60 cm x 70 cm) with above seat steering

New York City Recumbent Supply sells an Amtrak version Grasshopper fx

New York City Recumbent Supply sells a version of the Grasshopper fx that fits within the Amtrak size restrictions of 34″ x 15″ x 48″ (86 x 38 x 112 cm).

Please note: When traveling on Amtrak, be fully cooperative with the train staff always, even if you don’t like what they say.  If they don’t allow you to take a bike on-board, leave the train and take it up with the customer service people. Do not become belligerent; it won’t help you get your bike on-board; it’ll ruin access for cyclists; and it’ll tell me that I should not publish a cool tips like this on my website.

 

HP Velotechnik Street Machine Gte ready for Amtrak. Photo: M. Hopkins

 

Bicycles in Checked Baggage
Bicycles may be checked on Amtrak between all cities where checked baggage is offered. Not all trains have baggage cars and not all stations are equipped to handle checked baggage. Also, you as a passenger may not be able to travel on the same train as your bike (see wrinkle, below).
– The fee for checking a bike as baggage is $10.00. This is subject to change without notice.
– Check your bicycle at the station at least an hour before departure.
– Bicycles must be partially disassembled to fit in an Amtrak bicycle box. For standard frame bikes, loosen and turn the handlebars sideways and remove the pedals. Amtrak does not supply tools for disassembly. Most recumbents will require a lot more disassembly. And, though it’ll be easier to fit a short wheelbase recumbent in a standard bike box than a long wheelbase bent, neither is a sure bet. Try packing it at home before trying it at the station.- It may be helpful to disassemble and reassemble your bike before your trip to avoid any surprises. Some parts may be especially difficult to remove.- Attach your name and address to the box.
Note: Expedition cyclist Matthew Hopkins, who also has 20-years experience as a bike mechanic, dropped by NYC Recumbent Supply during his 30,000 mile Pan American tour. He found the Amtrak bike box far too small for his HP Velotechnik Street Machine Gte (he commented that the Amtrak box seems too small for a fixie).  He packed his Street Machine in an airline bike box to take it onto the train.

Here is the wrinkle. It is not convenient. And your bike may travel separately from you.

The train with the baggage car may be unable to carry you as a passenger along with your bike. In this case, the train will take your baggage (your bike) but it will not take you. You will need to take a different train. Amtrak will be carrying your bike as if it were delivering a package. (This is true at the time of writing. The rules may change. Verify trip details with Amtrak.)
Example. You want to go from New York City to Albany and start riding from there.  Both NYC and Albany have checked baggage service because there is one particular daily train that runs this route and has a baggage car, however NYC passengers will not be discharged from that train in Albany. Your bike will be discharged, but not you.
These trains have baggage cars and therefore provide checked baggage service between NYC and Albany:
Train #49 leaves New York City every day at 3:40pm and arrives in Albany at 6:20pm. It will take your bike to Albany (but not you).
Train #48 leaves Albany every day at 3:50pm, arrives NYC at 6:35pm. This is how you get your bike back home.
In NYC, you will put your bike in a box and put it on train #49. Then you will buy yourself a ticket for a different “commuter” train that will take you from NYC to Albany. In Albany, you will pick up your bike at the Baggage Department, reassemble it, and start riding.
Coming back, you will put your bike in a box on train #48, then buy yourself a ticket on a different train that will take you to NYC, and there you will reclaim your bike from the Baggage Department.
Baggage handling fee: $10.  Bike box: $15.
NYC Baggage Department hours: 5:15am-9:45pm
Albany Baggage Department hours: 6am-11:30pm
Long Wheelbase Recumbents and Tandems in Checked Baggage
Your bike has to go into a bike box and fall within Amtrak’s dimensions for checked baggage. If your favorite bent is longer than the dimensions, which may often be the case with long wheelbase bents, install bicycle torque couplings so you can split it into two pieces. A good brand is S and S Couplings. Hire your best local frame builder to install them. If the separated bike still doesn’t fit into one box, then pack it into two boxes and pay for the extra box. I’ve had a few bikes in the shop with S and S Couplings and I recommend them.
Amtrak Stations in the Northeast that have Checked Baggage Service
 

New York
Albany-Rensselaer
Buffalo-Depew
New York City
Rochester
Schenectady
Syracuse
Utica
(The Metro North has additional options)

Massachusetts
Boston
Springfield
Worcester

Connecticut
New Haven
(The Metro North has additional options)

New Jersey
Newark
(New Jersey Transit provides more options)

Pennsylvania
Philadelphia
Pittsburgh

Rhode Island
Providence

District of Columbia
Washington

Walk-On Bicycle Services

The following Amtrak trains have walk-on bike service.
Number of Spots Reservations Required Checked Service Available Bicycle Fee**
Amtrak Cascades* (British Columb., Wash., Oregon) 10 per train Yes Select Stations $5
Capitol Corridor (Calif.) 6 per train No No
San Joaquin (Calif.) 6 per train No Select Stations
Pacific Surfliner (Calif.) 6 per train No Select Stations
Downstate Illinois Services (Illinois) 4 per train Yes No $10
Missouri River Runner (Missouri) 4 per train Yes No $10
Downeaster
From Boston (North Station) to Brunswick, Maine
8 per train Yes No $5
Piedmont (North Carolina) 6 per train Yes No
Bicycles Stored Onboard in Bicycle Racks
Reserve Space Early
For trains with reserved bicycle space, bicycle racks may be reserved when booking travel; service fees may apply. Tickets must be supplied when tickets are collected onboard.
Secure Your Bike
Passengers are responsible for supplying their own cords and locking devices.
Specially Designated Spaces Only
Bicycles must be stored in the designated racks. For trains with unreserved walk-on bicycle service, racks are available on a first-come, first-served basis. When the racks are full, bikes will no longer be accepted onboard.
Liability
Amtrak disclaims liability for loss of or damage to bicycles carried onboard and stored in bike racks.Bicycles on Amtrak Express
Regular bicycles and unicycles may be shipped on Amtrak Express. Bicycles are generally exempt from Amtrak Express size requirements.
~ ~ ~Have fun, stay healthy, and go out and ride some Green or White Mountains or the ‘Daks,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2013 Robert Matson
Categories
Uncategorized

Just chatting about the weather.

Warmer weather is here. I like it. But I also like skiing and this marks the tailing of the remotely-local cross-country ski season…and the tailing of my slow season.

A manufacturer in Finland, Mirage Bikes (www.miragebikes.com/en), wrote me that their x-c ski season is coming to an end as well, but he (the writer) hopes to complete 1000 km (!) of skiing — apx. 620 miles — before then. I’m envious.

Nomad Red
Mirage Bikes’ Nomad.

I’m settling for one more weekend of skiing in the Adirondacks and then we’re in the backpack and pannier season. Today was the first day in ages to ride withOUT studded winter tires and WITH the sunshine, both. How nice.

Bike trips planned? There’s the 10-day 2014 Prince Edward Island bike trip I’m co-leading for the Appalachian Mountain Club, but that’s ages away. Sooner than that, if I can get away for a week, I may schedule an AMC trip in the Daks, VT, or Catskills. What’s with the idle chatter? I’m supposed to use the world’s most pervasive media outlet — FB — for marketing right? Or improving the world?

Okay, how’s this: HP Velotechnik’s new Scorpion fs 26 came in the other week. Unbelievably nice trike. Get your demos here.

HP Velotechnik’s Scorpion fs 26

Have fun, stay healthy, and go like “New York City Recumbent Supply” on Facebook,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2013 Robert Matson

Categories
Uncategorized

Bucket List Bike Trip: Prince Edward Island

I’m pleased to announce a bike trip on Prince Edward Island for summer of 2014 through the Appalachian Mountain Club’s Adventure Travel program (“AMC-AT”). AMC-AT trips are run non-profit by volunteer leaders.

Bucket List Bike Trip: Prince Edward Island

June 24, 2014, evening – July 5, 2014, morning.
$1,475 (USD)
(AMC, Adventure Travel)
                         

Over 10 days, we will ride nearly 500 miles around Prince Edward Island (PEI). From North Shore to South Shore and East Point to West Point, our scenic route circles the island, returning to where we started. Expect dramatic coastlines, inviting swimming beaches, picturesque rolling hillsides, historic farms, scenic roads, lots of exercise, fresh air…and good eatin’.
The island is famous for its fresh seafood, locally-grown produce, bakery goods and ice cream.  During our rest day in Charlottetown, we will have the chance to experience the cultural and civic side of PEI and dining options will include dinner at the Culinary Institute of Canada.
No SAG Wagon, but luggage will be shuttled by car. We’ll spend our nights in inns, a luxury university residence and a lighthouse. Price includes shared double-occupancy rooms and half the breakfasts. Limited to 14 participants.
Note: at the time I’m writing, the trip is not yet posted on the AMC website. If you do not find it, please check back.

Have fun and go ride PEI,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2013 Robert Matson

Categories
Uncategorized

Cruzbike rack weights

Quest racks:
Standard rack: 19.20 oz
Heavy Duty Rack: 24.35 oz

Sofrider Racks:
Old Man Mountain, Sherpa: 32 oz.

Dear Reader: If you have a great rack on your Cruzbike, please send me the make, model, weight and where you bought it and I’ll add it to this page.

Have fun and stay healthy,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2012 Robert Matson

Categories
Uncategorized

Wind chill, warm hands and telemagenta Speed Machines.

Reckless abandon
=
wind
+

+
+
chill

Let’s talk about wind chill.  When you ride a bike, you create wind and, on a cold day, that results in wind chill, which means immobile hands and numb feet.

It’s January.  You’re stir crazy.  It’s cold but the roads are clear and dry.  And you’re thoroughly jazzed about the new telemagenta HP Velotechnik Speed Machine you bought yourself for [insert your winter gift-giving holiday here] from New York City Recumbent Supply :-).

You put on your coat and hat and gloves and head out for an early morning ride to Nyack.  Eventually, the day’s high will be 25 degrees fahrenheit but it’s 15 deg. F when you hit the George Washington Bridge at 7am.  You warm your fingers in your arm pits, first the right hand in the left arm pit, then the left hand in the right pit.  At this point you’re still impressed with yourself; it’s amazing what you’ll do for a muffin.

Let’s pretend there’s no west wind, and no runners or walkers or slow cyclists weaving all over the place, so you’re making time, hitting 20 mph up the west side bikeway to the bridge.  With the chill and your early morning start, you’re feeling fast, and hardcore and, frankly, a tiny bit cold.  Well, no wonder.  That 15 deg. F temperature with a headwind of 20 mph results in a wind chill of -2 deg. F.

You’re wearing warm clothes, of course.  On the way there, as you ride up the hills of Henry Hudson Dr., you’re slowing to a very bent-like 5 mph (15 F at 5 mph = 7 deg. F wind chill).  You get warm, even a bit sweaty.  That’s bad.  Moisture compromises your insulating layers.  And you really don’t want sweat freezing on your face, but it’s too late to stop sweating now.

As you ride towards State Line, you hit some good downhills.  This is the fun part.  Usually.  How fast does this Speed Machine go?  Who cares what Robert said about staying within safe speeds.  It’s your bike now and you decide to push it.  40…45…50 mph.  Cool?  More than.  It’s frigid.  15 F at 50 mph = -10 deg. wind chill.  The thrill only lasts a minute and that’s a good thing because now you’re really frickin’ cold.  You can barely move your hands, you can’t feel your feet, and your most prized possession (not the bike) has shrinkaged to the point that it’s inside out.  The women’s equivalent, whatever it is, is doing the women’s equivalent, whatever that is, probably something a lot more sensible.

You begin to wish you were in a car.  Or maybe not.  At the bare minimum you begin to wish you had a fairing and a pair of windproof underwear.  But for now you’ll settle for a scone and hot chocolate in Piermont.  Eventually, you warm up.  You go back outside and start riding back, stopping at the police station and again at the ferry terminal to warm up.  This is beginning to sort of suck.  You can hardly wait to brag about your misery on Facebook.

How could you have dressed for this?  Do you dress for the 15 F temps when you first walk out the door?  The -2 F wind chill of your cruising speed?  The -10 degrees that freeze your fingers beyond any chance of rewarming as you ride?  Or the 7 deg. temps so you don’t sweat on the hills?  Isn’t the idea that you get warmer as you move?

Some people say layers and lots of zippers so you can vent as you get hot.  I tend to believe in vapor barriers which at least prevent sweat from compromising your insulating layers.  Winter backpackers have told me they wear windproof layers over bare legs.

Currently, this is what I’m trying (without using a fairing).  Wearing windproof layers, like rain gear, I dress for the wind chill I predict I’ll experience most of the time with the ability to vent as much as possible as my activity generates warmth.  Zippers must be operable with one hand.  Controlling how the wind flows across my skin is key to staying warm or cool, so a ventable outer windproof layer is important.

Then, since my feet and hands are so vulnerable to wind chill on a recumbent, I try to keep them as warm as possible under the theory that, generally speaking, they can never be too warm (at least not for me).  I do everything I can to windproof them.  On my feet the first layer is a vapor barrier, then warm socks (or neoprene socks), then insulated winter boots.  If it’s not too horribly cold, I’m okay with neoprene socks and bike shoes but, generally, I give up on comfortably* using clipless pedals till the warmer weather.  (*I’ll go out and uncomfortably ride with cold feet for an hour or so with clipless pedals, but not much more than that.  I’d like to preserve the nerves in my feet.)

On my hands, I’m currently doing this if it’s very cold.  First layer, vapor barrier.  (I use cheap latex gloves till they tear.)  Then 3mm neoprene glacier gloves.  Then windproof/waterproof shell mittens.  I’m trying to maintain a layer of dry insulating air between each layer of clothing.  I was disappointed to discover that glacier gloves alone were not good enough (for me) at windchills of about 17 F.  Adding the shell mittens made a huge difference.

If it’s a bit warmer and I want some dexterity, for example so I can handle a bike lock and key, I’ll start with the latex glove vapor barriers, then add glove liners, and then a pair of Outdoor Research Storm Tracker gloves.  I wouldn’t hesitate to put a shell mitten over this.  The advantage to this is I can remove the bulkier layers without exposing my hands for even a moment to cold air and the cold metal of the lock.

I have a metal watch.  I remove it on cold days because it conducts the cold directly to my skin.  When I do wear it, I’ve noticed that my watch hand gets colder than my non-watch hand.  If I feel I must wear a watch, I’ll wear it on top of a base layer.  This also makes it easier to look at.

Any metal on the bike will make you cold, so it also helps to cover the metal brake levers with insulating tape.  An extra layer of handlebar tape or neoprene or foam around the handlebar grips will help a lot too.

Getting deeper into wind chill.

What is Wind Chill Temperature?
It is the temperature it “feels like” outside and is based on the rate of heat loss from exposed skin caused by the effects of wind and cold. As the wind increases, the body is cooled at a faster rate causing the skin temperature to drop. Wind Chill does not impact inanimate objects like car radiators and exposed water pipes, because these objects cannot cool below the actual air temperature.

On November 1, 2001, the National Weather Service implemented a new Wind Chill Temperature (WCT) index for the 2001/2002 winter season, designed to more accurately calculate how cold air feels on human skin. The former index used by the United States and Canada was based on 1945 research of Antarctic explorers Siple and Passel. They measured the cooling rate of water in a container hanging from a tall pole outside. A container of water will freeze faster than flesh. As a result, the previous wind chill index underestimated the time to freezing and overestimated the chilling effect of the wind. The new index is based on heat loss from exposed skin and was tested on human subjects.

For the first time, the new Wind Chill Chart includes a frostbite indicator, showing the points where temperature, wind speed and exposure time will produce frostbite on humans. The chart above includes three shaded areas of frostbite danger. Each shaded area shows how long (30,10 and 5 minutes) a person can be exposed before frostbite develops. For example, a temperature of 0°F and a wind speed of 15 mph will produce a wind chill temperature of -19°F. Under these conditions, exposed skin can freeze in 30 minutes.

The NWS will inform you when Wind Chill conditions reach critical thresholds. A Wind Chill Warning is issued when wind chill temperatures are life threatening. A Wind Chill Advisory is issued when wind chill
temperatures are potentially hazardous.

What is Frostbite?

Frostbite is an injury to the body caused by freezing body tissue. The most susceptible parts of the body are the extremities such as fingers, toes, ear lobes, or the tip of the nose Symptoms include a loss of feeling in the extremity and a white or pale appearance. Medical attention is needed immediately for frostbite. The area should be SLOWLY re-warmed.

What is Hypothermia?
Hypothermia is abnormally low body temperature (below 95 degrees Fahrenheit). Warning signs include uncontrollable shivering, memory loss, disorientation, incoherence, slurred speech, drowsiness, and apparent exhaustion. Medical attention is needed immediately. If it is not available, begin warming the body SLOWLY.

Tips on how to dress during cold weather.
– Wear layers of loose-fitting, lightweight, warm clothing. Trapped air between the layers will insulate you. Outer garments should be tightly woven, water repellent, and hooded.
– Wear a hat, because 40% of your body heat can be lost from your head.
– Cover your mouth to protect your lungs from extreme cold.
– Mittens, snug at the wrist, are better than gloves.
– Try to stay dry and out of the wind.
– Keep your face dry, especially around the nose and mouth.
– Remove metal objects from your body, such as watches, bracelets, jewelry. Metal conducts cold onto and into your skin.

National Weather Service Wind Chill web page

Environment Canada’s Wind Chill web page

[Source: National Weather Service (U.S.A.)]

Have fun and stay warm,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2012 Robert Matson

Categories
Uncategorized

Viet Nam calling.

New York is a funny place.  There are 8.2 million people in the city.  That allows for a lot of variation.  Most of those people are ordinary and decent: their lives are okay — could be worse, could be better (could be a lot better if they were riding a recumbent bike).  Meanwhile, the city’s reputation is tainted by several thousand jerks, many of whom drive SUVs and luxury taxis.  Working with a bell curve here, my totally unscientific and uninformed rough guess is that 2.2% of New Yorkers are chronically bitchy — 181,388 people who are simply mean.  (And another 2.2% — 181,388 — who are chronically giddy.  Look out.  Either they are doping or they just moved here last week.)  Going down this ridiculous path of invented statistics, I’ll estimate that another 13.6% or so, conservatively, probably didn’t sleep well last night.  So, 1,121,308 New Yorkers who were nice yesterday, but today, look out.

In my business, I don’t meet a lot of people who are having a bad day.  In fact, usually they’re having one of the best days of their life when they come through my door.  It’s not because of me.  It’s because they’re about to discover the joy of riding a recumbent bike (or trike).  But every now and then one of those chronically bitchy people seem to decide that they absolutely must reach out and touch me.  Ick.  Gross.  Yuck.  Something like this happened recently and it can really bum me out.

Other times, someone comes along who makes my day and reminds me why I like the city.  Case in point, the other day a customer called from Viet Nam just to say thank you for recommending, speccing and selling her what has been an excellent (perfect?) bike for her travels — a Volae Century ES with several special additions.  We had a great conversation about what she’s up to, what I’m up to, and whether her Red Hook home was flooded by Sandy in her absence.  It was funny how casual it felt even though we were speaking over such a long distance!

How nice!  I tell you, that’s why I do this.

Keep on Truckin’,
Robert
————
Robert Matson
New York City Recumbent Supply
The Innovation Works, Inc.
copyright 2012 Robert Matson